Rjs Inspector D4000 SP (FIRMWARE version A.06 and Late Instrukcja Użytkownika Pobierz pdf (Strona 39)

Operator’s Guide Appendix A

002-5572 RJS, Minneapolis, MN

Appendix A (Scanning Technique)

The D4000 Laser SP bar code verifier utilizes the CR2

Laser which has three major improvements when

compared to the previous models:

 Codes with an X dimensions as small as 5 mils

(0.005 inch, 0.127 mm) can be analyzed (vs.

0.0075 inch, 0.190 mm).

 More accurate correlation to the ISO/ANSI

Decodability calculation is achieved.

Scanning Technique

 Lay the symbol to be scanned on a flat, non-

reflective surface

 While the laser beam is not over a bar code pull

the trigger on the Laser

 Adjust the angle and distance of the Laser to the

bar code sample so that the distance results in a

laser beam that is twice as wide as the bar code

(at least 2 inches wide) and the angle is at 30 de-

grees (angle of the exit window on the Laser)

 Once at the proper angle and distance, drag the

laser beam over the bar code (maintaining the

angle and distance)

Figure A-1 (Scanning Position)

Note:

A label containing this information is also attached to

the top of the scanner for quick reference.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Brak uwag

Rjs Inspector D4000 SP (FIRMWARE version A.06 and Late Instrukcja Użytkownika Strona 39