Rjs Inspector D4000 Auto Optic (FIRMWARE version A.05 Instrukcja Użytkownika Pobierz pdf (Strona 26)

Operator’s Guide Inspector 4000™

002-5564 RJS, Minneapolis, MN

7.0 Scanning Symbols

After a bar-code is scanned, the Inspector 4000 will respond with a crisp, chirp (or beep)

sound.

Decoded data and symbology type will display:

01928374

01 Scan Remain.

Press Enter to navigate to more detailed analysis screens:

Code 3of9

Acceptable

(See Pass/Fail Analysis Screen section)

7.1 Scanning Techniques

 Lay the symbol to be scanned on a flat, non-reflective surface.

 For greatest accuracy scan a symbol more than once, in both directions.

 Begin a scan from the “quiet zone” as far from the symbol as possible. See Appendix I

for details.

 Make sure the scan head is flat against the symbol.

 Move the scan head across the symbol in a smooth motion. A constant speed of 5 to

10 inches per second is ideal. Scanning too fast will cause the LCD display to read

“Please Scan Slower.”

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 80 81

Brak uwag

Rjs Inspector D4000 Auto Optic (FIRMWARE version A.05 Instrukcja Użytkownika Strona 26